Daily Archives 17.08.2017

Laboratories PPIT, PLIT or PPS



Laboratories are intended for conducting of vertification, regulation works and short maintenance of various measuring tools in places of their operation and can be mounted on the base of both beach wagons Fiat Ducato, Ford Transit, and lorries KAMAZ, URAL, GAZ.

Laboratories are equipped with necessary systems for life support (heating, ventilation, conditioning) and can be equipped with autonomous energy systems. Configuration of PPIT, PLIT or PPS depends on destination of laboratory and is completed in accordance with technical mission, coordinated with the customer.

Laboratories can provide conducting of measuring tools vertification works of radio aids, electrical values, pressure and depression, medical supplies, mass vertifications, volume and consumption, as well as other work types for the constant maintenance and technical service of vertifications.

Mobile workshop MW PMT-1



Workshop is intended for technical service, diagnosis, short and medium maintenance of special devices, built-in and weapons and military equipment of army PMT. Produced on chassis of URAL, KAMAZ, GAZ.

When deploying MW PMT-1 can be equipped following working areas:

  • for conducting electrotechnical works;
  • for maintenance and diagnosis of PMT
  • for conducting painting works;
  • for conducting metalwork works;
  • for calibrating military monitoring instruments
  • - for maintenance of devices and sets of special processing;
  • for charging batteries;
  • for conducting welding operations.

Mobile hydraulic system MHS200/260


 Mobile hydraulic system (MHS200/260) is intended for supply, refueling and pressure test of hydraulic systems of FM with working fluid while their terrestrial development test, as well as for supercharging of hydraulic tanks of FM with nitrogen and power supply of hydraulic systems of FM. MHS 200/260 provides:
  1. working fluid supply of one or simultaneously two hydraulic systems of FM;
  2. refueling of hydraulic systems of FM with working fluid;
  3. pressure test of hydraulic systems of FM with working fluid;
  4. supercharging of hydraulic tanks of FM with nitrogen;
  5. power supply of hydraulic systems of FM with a direct current;
  6. pour of working fluid, when unserviceable, from main and supportive hydro-systems and their flushing with nitrogen, supplying from cylinders MHI 200/260;
  7. closed fueling of the main tank by the way of its swapping from can with a forcer or from refueler with special fluids (RSF-66 or analogs);
  8. filling suction or pressure hydrolines of main hydro-systems with working fluid;
  9. cyclization of working fluid of main hydro-systems;
  10. removing gas from working fluid of main hydro-systems;
  11. heating of working fluid in main hydro-systems;
  12. sampling of working fluid from main hydro-systems for defining the class of purity.

Mobile hydraulic service (MHS200/260) is intended for supply, refueling and pressure test of hydraulic systems of airplanes with working fluid while their terrestrial development test, as well as for supercharging of hydraulic tanks with nitrogen and power supply of hydraulic systems.

MHS-200/260 provides:

  1. working fluid supply of one or simultaneously two hydraulic systems of airplanes;
  2. refueling of hydraulic systems with working fluid;
  3. pressure test of hydraulic systems with working fluid;
  4. supercharging of hydraulic tanks of airplanes with nitrogen;
  5. power supply of hydraulic systems with a direct current;
  6. pour of working fluid, when unserviceable, from main and supportive hydro-systems and their flushing with nitrogen, supplying from cylinders MHI 200/260;
  7. closed fueling of the main tank by the way of its swapping from can with a forcer or from refueler with special fluids;
  8. filling suction or pressure hydrolines of main hydro-systems with working fluid;
  9. cyclization of working fluid of main hydro-systems;
  10. removing gas from working fluid of main hydro-systems;
  11. heating of working fluid in main hydro-systems;
  12. sampling of working fluid from main hydro-systems for defining the class of purity.

As a working fluid in a plant AMG-10 or 7-50s-3 fluids can be used.

Command and staff vehicle CSV


Command and staff vehicle CSV is intended for providing autonomus work of operational staff in the field and is mounted on vehicle van body on the base of vehicle chassis KAMAZ-43118.

Resting vehicle RV is intended for operational staff's rest in the field and is mounted in vehicle van body on the base of vehicle chassis KAMAZ-43114.

Van bodies of vehicles correspond to climatic modification UHL1 GOST 15150-69 and are designed for operation at ambient air temperature from 50⁰С to -50⁰С in temperate zones.
Vehicles can be equipped with different facilities upon request of the customer.

SYSTEM OF AVIATION LINE MAINTENANCE SLM


 
System of aviation line maintenance is intended for diagnosis and maintenance of typical combat and operational damages of various type aircrafts elements, at transportable and stationary use cases. Works under way must be conducted in the volume, allowable operational and maintenance documentation on aircraft under troop circumstances. The system includes four laboratories:

Designation of laboratory

Designation of main design document

ACP code

1

2

3
SLM-NIT 58981-0000010

4521601316
SLM-PB 58981-0000010-01

4521601317
SLM-EKP 8862-0000010

4525801096
SLM-PLC 8862-0000010-01

4525801097
SLM-NIT – ystem of line maintenance for defecating and control of executed works quality with use of non-destructive inspection techniques. Checkout gear, devices and measuring equipment of laboratory provide detection of defects, diagnosis and regeneration quality control with use of the following non-destructive assay techniques:
  • optical-visual;
  • magnetic-particle;
  • vortex-current;
  • liquid penetrant testing;
  • ultrasonic;
  • impedance (acoustic)
SLM-PB – system of line maintenance of rotor system elements (propellers and blades) AF. Maintenance equipment, instrument and gears of laboratory provide conducting the following types of work:
  • disassembly-assembly, as well as on high volcanic aggregate and nodes of AF (blades, propellers and so on.);
  • removal of damaged elements of structure and separate compartments;
  • preparation and storage of ground, slops, glues, sealers and filling pastes;
  • riveting;
  • glue and painting works;
  • metalwork-electrical works;
  • vertification of de-icing systems and longeron damage alarm system;
  • longitudinal balance of propeller carrying blades and balance of tail propeller of helicopter.
SLM-EKP – for maintenance of nonbearing elements of frame construction, pipelines, actuating rod, cable circuit and so on. Maintenance equipment, instrument and gears provide conducting the following types of work:
  • disassembly-assembly;
  • turn-mill;
  • metal-metalwork;
  • non-metal-metalwork, as well as compositional materials;
  • drilling;
  • riveting;
  • sheet metal;
  • arc and plasma-arc welding and cutting of black and color metals;
  • cable-rope;
  • expander;
  • leakage test of pipelines pneuma- and hydro-systems;
  • press-pipe bending.
SLM-PLC – system of line maintenance for restoration of paint, laquer and stealth technology coating and vitrification. Maintenance equipment, instrument and gears provide conducting the following types of work:
  • preparation and storage of ground, slops and enamels;
  • preparation and storage of stealth technology coating;
  • painting works;
  • vitrification metalwork;
  • vulcanizing-glue;
  • grinded and polished;
  • maintenance of inboard electricity and intrablock assebling cables.
Production facilities of System are placed in two vehicle van bodies K4.5350 on chassis KAMAZ 5350 (laboratories SLM-NIT and SLM-PB) and two KP8 on trailer-chassis ChMZAP-8335.3 (laboratories SLM-EKP and SLM-PLC), as well as System set includes two quick-mounting heat tents.

Control repair laboratory KRL


CRL-AE is intended for radiation and navigation equipment with electric power plant of a type ESD-30/400.

CRL-PMW is intended for conducting metalwork-mechanical works on a glider and equipment of aircrafts and helicopters.

CRL-EC (AE) is intended for conducting in-the-field maintenance works and repairs on aggregates of helicopters and aircraft engines.

CRL-AS is intended for conducting in-the-field maintenance works of instrumental, oxygen and altitude equipment and aggregates of aircraft and helicopter electronic mechanization.

CRL-AS-E is intended for conducting in-the-field maintenance of electronics and microelectronics, as well as charge, service support and maintenance of aircrafts and helicopters onboard batteries.

CRL-MS is intended for conducting maintenance works and repair of avionic electronics, radio altimeter, and their antenna systems, recorders and voice information reporting systems, compass locators, marker beacon receiver and their antenna systems.

CRL-MSS is intended for conducting Doppler velocity and drift gauge and their antenna systems, radio communication and other airborne avionics.