Daily Archives 10.08.2017

Mobile station for measuring instruments calbiration MSMIC


MSMIC is intended for conducting different types of metrology service group works in a vertification of measuring instruments (MI), exploiting units of Customer in permanent deployment places, as well as diagnosing, accounting, storage and cataloging of data received about measuring instruments with the help of specialized computer software (SW).

Mobile station will provide conducting of the following works:

  • - calibration of radio-technical and radioelectronic values measuring instruments;
  • - calibration of electrical and magnetic values measuring instruments;
  • - calibration of pressure and depression measuring instruments;
  • - calibration of medical purpose measuring instruments;
  • - mass calibration;
  • - calibration of stream, level, value and substance consumption of measuring instruments;
  • - calibration of special use measuring instruments;
  • - other types of work of running maintenance and technical service of measuring instruments.

System is designed for operation in temperate zones under conditions:

  • - temperature range of ambient air– from minus 40 °С to 50 °С (measurement error no more than 1 °С);
  • - high humidity (98±2) % at temperature (35±2) °C;
  • - low air pressure no more than 60 kPa;
  • - precipitation intensity no more than 180 mm/h;
  • - medium wind velocity no more than 25 m/s.

Special liquid refiller SLR


SLR, МЗ is intended for filling up aircrafts in open and closed ways with synthetic and mineral oils, oil mixtures, hydraulic fluids and launching fuel (petrol).

Refiller МЗ can also conduct oil heating.

Custom vehicle can be mounted on the base of GAZ, URAL, KAMAZ chassis.

Snow ploughs DE-210BM, DE-22


Snow plough DE is intended for snow clearance from air-strips, taxiways, aircraft and helicopter parking space, access roads to port, highways, as well as for throwing away snow banks, formed by other snow ploughs.

Snow plough can work in all climatic zones at ambient air temperature up to minus 45оС. Operation of snow plough is recommended at thickness of snowpack or height of pack no less than 0, 7 m.

Snow ploughs can be mounted on the base of vehicles URAL, KAMAZ.

DE-210BM is designed by single-motor scheme, in which basic engine is transferred to the back side of vehicle. DE-226 is designed by two-motor scheme, which first engine is placed in proper location of vehicle, and second one under body hood, behind the cab..

Snow ploughs are additionally completed with loading flume and nozzle, placed on rotor casing, for restricting casting distance of snow when working near the objects. Blowout of snow can be made in left or right from vehicle.

Aviation electroconversion aggregates AEMG-50M1, AEMG-60/30M1


Aggregate AEMG-50М1 is intended for on-the-ground electrical starting of aircraft's engines in mode 24V and 24/48V, as well as for on-the-ground charge of electrical apparatus with direct current of 28,5V voltage, with single-phase alternating current of 115V voltage and 400Hz frequency and three-phase alternating current of 36V voltage, 400Hz.

Aggregate AEMG-60/30M1 is intended for charging consumers with three-phase alternating current of 400Hz frequency, 208V voltage and single-phase alternating current of 400Hz frequency and 120V voltage.

Aggregate works from three-phase alternating current mains of 50Hz frequency and 380V voltage with ungrounded neutral system.

Aggregate is designed for continuous work in all weather conditions at ambient air temperature from minus 500С to 500С and allows transportation by concrete and asphalt roads at 60 km/h speed, and by dirt, cobblestone and gravel roads at 30 km/h speed.

AEMG-50M1: Direct current transducer type MG-600х2M, single-phase alternating current transducer type PO-6000, three-phase alternating current transducer type PT-1000CS

AEMG-60/30: three-phase alternating current transducer type VPL-50.

AEMG-60/30M1: three-phase alternating current transducer type PCh-60.

Autoclubs AK-03 and PAK-07


Autoclubs АК-03 and PAK-07 are intended for holding mass-cultural events, meetings, briefings, in-the-field works of leaflet teams.

AK-03 includes basic vehicle KAMAZ-43118, special equipment, transformable body with lifter-roof tank and movable stage.

PAK-07 apart from the main autoclub includes trailer for transporting additional equipment.

Roof lifting of AK-03 autoclub is made by chassis pneumatic system, PAK-07 – with the help of hydraulic forcer. Conducting different variants are possible upon the request of customer.

Can be mounted on the base of vehicles KAMAZ, URAL, GAZ.

Autoclub set includes various illuminating, special sound and video hardware, which completeness and configuration depends on customer's requests.